Add and set up indicators
An indicator belongs to the chart you add it to. Each chart on your desk keeps its own, with its own inputs and look, and keeps them when you reload in the same browser. You add them from Indicators on the chart's toolbar and change them from their rows in the legend at the chart's top left.
Watch this guide as a video: Add and set up indicators
Plays here, from YouTube, when you click.
Steps
- Click Indicators on the chart's toolbar. On a narrow chart it shrinks to its icon, then moves under the toolbar's three-dot button, where it reads Indicators. Right-clicking an empty part of the chart, away from the candles, and choosing Indicators… opens the same list.
- Type part of a name, such as VWAP, EMA, RSI or MACD, then click the indicator. Enter adds the highlighted one. It goes on this chart only. The list stays open so you can add more, and Esc closes it. With nothing typed, the list shows every indicator by family, such as VWAP & volume, Moving averages, Volume, Momentum and Bands & channels. Recently used holds the last five you added, and the star on a row puts it under Favourites at the top of the list on every chart.
- See where it drew. VWAP, the moving averages such as EMA and SMA, and Bollinger draw over the price bars. Volume, RSI and MACD each open a pane of their own under the price. Every indicator also gets a row in the legend at the chart's top left, under the stock's prices, with its name and its numbers, such as EMA 20.
- To change a number, click it in the indicator's legend row. Type the new value and press Enter, or press Esc to leave it as it was. A 20 EMA becomes a 9 EMA this way. A value out of range is brought back into range.
- For everything else, click the first of the small buttons at the end of the row, with the sliders icon. It opens the indicator's settings, as does right-clicking its line and choosing Edit…. On Inputs & style, Parameters holds its inputs and Styles sets each line's color, its width from 1 to 4 and solid, dashed or dotted, with Plot to draw or hide that line. Levels holds lines such as RSI's Lower level and Upper level, 30 and 70 to start, and MACD's Zero line, each with its value, look and an on or off switch. Fills shades a band, as on Bollinger. The Visibility tab picks the timeframes it draws on. There is no save button: each change shows on the chart at once.
- Hide, remove or move it with the row's other buttons. The eye hides it without removing it. The cross removes it at once, and any indicator that reads it goes too; Ctrl+Z (⌘Z on a Mac) brings them back. The three dots open a menu: Move up, Move down, Move to new pane below and Merge into pane above move it between panes, and Pin to scale sets the price scale it reads against.
- To change the height of a pane, drag the line between it and the pane above. The heights are kept with the chart. Point at the chart and each pane shows two buttons at its top right: Collapse pane folds it to its legend line, and Maximize pane fills the chart with it until you click Restore panes. Those two are not kept. A pane goes when its last indicator is removed.
- To use the same set on another chart, save it as a template. Click the gear at the top of the chart to open Chart settings, then Manage. Under Templates, click Save… beside Indicator, type a name and click Save. On the other chart, open the same tab and click the template's name. It replaces that chart's indicators at once; Ctrl+Z (⌘Z on a Mac) puts them back.
An indicator's legend row
- The indicator's name.
- Its inputs: click a number to edit it in place.
- Its value at the crosshair, or at the latest bar while your pointer is off the chart.
- Configure opens the indicator's settings.
- Hide, the eye, hides the indicator without removing it, and then reads Show.
- Remove, the cross, removes the indicator. Indicators that read it are removed with it.
- Move, the three dots, opens a menu that adds an alert or another indicator on this one, moves it between panes and pins it to a scale.
- The arrow under the legend folds the legend away.
An indicator's settings
- Whose settings these are: this indicator only.
- The tabs: Inputs & style and Visibility. Visibility sets the timeframes the indicator draws on.
- Parameters holds the indicator's inputs. Source, on indicators that have it, is the price the indicator reads.
- Styles has one block for each line or histogram the indicator draws: its color, and for a line its width and solid, dashed or dotted. Plot draws or hides the line. Axis tags its latest value on the price axis.
- Color bars, on VWAP, SMA, EMA, MACD and SuperTrend, colors the price bars by the rule printed under the label.
- The Defaults menu holds Reset settings, Save as default and, once you have saved one, Forget saved default.
Good to know
-
Each chart keeps its own
An indicator added to the 1m chart is not on the 5m chart. Add it to each chart you want it on, or use a template. It stays on its chart when you change the chart's stock or its timeframe.
-
After a reload, in another browser, on another layout
Your charts come back with their indicators after a reload in this browser. To keep the whole desk on your account, click Layout, then Save as…, and pick it under Saved in another browser. Picking a built-in layout under Layout rebuilds the desk at once, and its charts start with no indicators.
-
Chart settings' Save as default leaves indicators out
In Chart settings, Defaults and then Save as default makes new charts start with this chart's look: its chart type, scales, canvas and the rest. It does not carry its indicators or its timeframe. A Chart template, saved under Templates the same way as an Indicator one, carries the look, the indicators and the timeframe, so applying it also changes the chart's timeframe.
-
Start each new copy of an indicator your way
In an indicator's settings, Defaults and then Save as default makes every new one of that indicator, on any chart, start with these inputs and this style. Reset settings puts one back to it, and Forget saved default lets new ones start from the built-in settings again. It is kept on your account.
-
The same indicator twice
Add it again from the list. Each copy has its own row, inputs and look, and a new one drawn over the price, such as a second EMA, takes a color not yet on the chart. For a 9 and a 20 EMA, add EMA twice and change the first one's 20 to 9.
-
VWAP from the day's first bar, or from a bar you pick
VWAP has no inputs and starts from the day's first bar on the chart, so it takes in the pre-market while Extended hours is on, as it is on a new chart. Turn it off in Chart settings, Canvas, and the chart and its indicators use the regular session only, so VWAP starts at 09:30. To start one from any bar, open the list of Forecasting and measurement tools on the drawing rail with the small arrow in that button's corner, choose Anchored VWAP and click the bar. It is an indicator, so it stays on that chart; drag its handle to move where it starts.
-
Volume behind the candles
Instead of a Volume pane, turn on Volume on price pane in Chart settings, Symbol, to draw the volume bars behind the candles. It is off on a new chart, and the chart's Save as default keeps it for new charts.
-
More than six indicators
The legend shows five rows, then a plus sign with the number of the others. Click it to open Chart settings at Manage, which lists every indicator, each with its sliders, eye and cross. The arrow under the legend folds it away, and clicking it again brings it back.
-
An indicator on another indicator
On the row's three dots, Add indicator on, followed by that indicator's name, lists the indicators that can read another one. Pick one, such as SMA on RSI, and it reads that indicator instead of the price and sits in its pane. Removing the first removes it too.
-
Remove them all, or undo
The drawing rail's last button, Remove drawings or indicators, has Remove indicators; on a short chart it is behind More drawing tools. With more than one it asks first. Ctrl+Z (⌘Z on a Mac) undoes the chart's last change to its indicators, drawings or settings, and Ctrl+Shift+Z (⇧⌘Z on a Mac) redoes it; click the chart first.