Hindsight Markets Beta

Hindsight Markets Help

Orders, Trades, Positions and Account windows

Four windows keep the books of a replay. Orders lists every order with its status and lets you cancel or change one, Trades lists your fills or your finished trades, Positions lists what you hold with a Flatten button and a ⋯ menu on each row, and Account shows the balances and holds your daily loss limit. Each has a gear for its columns, display and appearance, and each window keeps its own settings, saved with it in your layout.

Where the settings are

Click the gear at the right end of a window's header, or right-click the header row. No key opens it. The dialog has three tabs, Columns, Display and Appearance, with Export CSV under them. A change shows in the window at once and there is no Apply button. The Account window has two gears: the first opens the replay's simulated account, the second opens this dialog, and a right-click opens the second. A right-click on a row in Orders, Trades or Positions opens that row's own menu instead. Account rows have none.

The Positions window

The Positions window on the Scalper desk, holding one long position of 100 shares, with its parts numbered: the count, Flatten all, the clock, the link group, the gear, the column headings, the position, and the Flatten and ⋯ buttons at the end of its row.
  1. The count of open positions, such as 1 open.
  2. Flatten all closes every open position, after cancelling the working orders on those symbols, and asks first. It closes at the market, or before the open and after the close with a DAY+ limit at the bid or the ask.
  3. As of: the replay time the figures are for, in New York time.
  4. The link group: a click on a row's symbol points that group's windows at it.
  5. The gear opens this window's Columns, Display and Appearance.
  6. In a small window some column headings are short: Qty for Shares, Avg for Avg cost, R P&L for Realized and U P&L for Unrealized.
  7. An open position: click its symbol to bring that symbol up in this window's link group.
  8. Flatten, written Flat in a narrow window, closes the whole position and asks first. The ⋯ beside it opens the row menu, as a right-click on the row does: Flatten, Reverse, Close 25%, Close half, Close 75% and Show trades.

The Orders window

The Orders window with All chosen, listing a working limit sell above a filled market buy, with its parts numbered: the status list, the count, Cancel all, the gear, the column headings, the cancel button, Replace and the filled order.
  1. The status chips, folded into one list in a small window: Open, Fill, Cxl, Rej and All, for Open, Filled, Cancelled, Rejected and All. A new window is on Open. This one is on All.
  2. The count of orders you can still cancel, whichever chip is pressed.
  3. Cancel all, written Cxl all in a small window, with its key. It cancels every working order in the replay and asks first.
  4. The gear opens this window's Columns, Display and Appearance. The chain mark beside it sets the window's link group.
  5. In a small window some column headings are short: St for Status, Sym for Symbol and Rem for Remaining.
  6. The × at the start of a working row cancels that order at once, without asking.
  7. Replace, written Rpl in a narrow window, opens the order for you to change, in an order ticket that is showing that stock.
  8. A filled order: a finished order has no × and no Replace.

The Trades window

The Trades window, the tab behind Orders on the Scalper desk, listing one fill, with four parts numbered: the count, the link group, the gear and the fill.
  1. The count of fills, such as 1 fill.
  2. The link group: click a row's symbol to bring that symbol up in this window's link group.
  3. The gear opens this window's Columns, Display and Appearance.
  4. One row for each fill, the newest first: Time, Symbol, Side, Price, Qty, Route, Liquidity, Fee and P&L. P&L shows a dash on a fill that opened a position.

Orders window: header

Orders lists every order you sent in the replay, the newest first. A bracket's stop and target, and the second leg of a Range, fold under one row with a + in front. Its header holds the status chips, the count, Cancel all, the link group and the gear.

Each chip you press is kept for that window, so one Orders window can show Open beside another showing Filled.

Orders window: columns

Columns are listed by their heading. The two button columns have a blank heading, so they are listed by the name the settings give them. A new window shows the first eleven, in this order.

When the replay has ended, the rows stay and the × and Replace buttons go.

Orders window: groups and the row menu

A bracket's stop and target fold under its entry, and the two legs of a Range fold under the lower-numbered one, so each group takes one row. A right-click on any row opens that row's menu at the pointer, headed with the symbol and order number, as in ABCD #12. The menu does not open once the replay has ended.

A bracket folds while its entry's row is listed. Under Open, once the entry has filled, the entry is no longer listed, so its stop and target stand as rows of their own. A Range folds while both its legs are listed. With the Cancel (X) column removed there is nowhere for the +, and every leg has its own row. A menu item that cannot act stays in the menu, dimmed: hover it for the reason, and choosing it shows that reason and sends nothing. On a finished order that is Cancel and Replace, whose reason reads This order is no longer working.

Orders window: status words

The Status column prints one of these words. In a narrow window it prints the short form given with each, and hovering the cell shows the full word.

Trades window

Trades lists your executions, the newest first. Rows on the Display tab sets what one row is: one fill, which is the default, one order, or one finished trade from entry to exit. An order that never filled is not here: look in Orders. The header shows the count, such as 3 fills or 2 trades, then the link group and the gear. A new window shows the first nine columns. These are the columns of one row per fill; Per trade has its own, in the next section.

When the window's link group has a symbol, that symbol's rows are shaded. When filters hide some rows the count reads like 1 of 3 fills. While Linked symbol only is on and the group has a symbol, a chip such as ABCD only × follows the count: click it to show every symbol again.

Trades window: Per trade

With Rows set to Per trade, each row is one finished trade on one symbol, from the fill that opened it to the fill that left it flat, the newest close first. A position still open is not listed until it is flat, and after a rewind a trade that closed later than the new clock time is not listed. This view has its own columns, sort, Linked symbol only and Appearance, saved apart from the per-fill ones, and the gear shows them while it is on. Side is not offered on the Display tab here. A new window shows the first nine columns.

Before the replay has a finished trade the window reads No finished trades yet. When there are more finished trades than the window lists, a line under the table says how many older ones are left out, as in 2 older trades are not listed here; the Journal has them. Show trades in the Positions row menu switches this window to Per trade for one symbol.

Trades window: row menu

A right-click on a row opens its menu at the pointer, headed with the row's symbol. It works in every Rows view, and still once the replay has ended.

Positions window: header and row buttons

Positions lists each open position. The symbol of the window's link group is highlighted and listed first, and the rest follow in alphabetical order. The header shows the count, such as 2 open, then Flatten all, the clock, the link group and the gear. Each open row ends with Flatten and ⋯.

Nothing is sent until you press the named button in the box. Cancel, Esc or a click outside it sends nothing. When you accept, the order is worked out again from the position as it is then. A button or menu item is dimmed when it cannot act, for example Reverse before the open, or Flatten before the open when the stock has no bid to sell at. Hover it for the reason, or click it and the reason shows at the bottom right of the screen. A closed row has ⋯ alone, holding Show trades, and a click on the row away from its symbol does the same. Once the replay has ended no buttons show, but a right-click on a row still opens its menu with Show trades alone.

Positions window: row menu

The ⋯ at the end of a row, or a right-click anywhere on the row, opens this menu, headed with the symbol. On an open row it holds every item below, with a line before Show trades. On a closed row, and on every row once the replay has ended, it holds Show trades alone.

Close 25%, Close half and Close 75% never send more than you hold, so they can leave you flat but never turn the position round. Each is refused while exit orders already working, such as a stop for the whole position, cover those shares: the message names the order and points you to Flatten.

Positions window: columns

A new window shows the first eight, in this order. The button column has a blank heading and the settings name it Actions.

Realized, Unrealized and Day P&L carry ▲ for a gain or ▼ for a loss as well as their color. A loss also carries a minus sign, a gain has no plus sign, and an exact zero shows a dot. The % column writes a plus or minus sign in the up or down color. P&L/share, Change and % change write a plus or minus sign too, in the row's own color. Fills, Sold long, Avg sold long, Sold short and Avg sold short show a dash while the day's fills do not add up to the position held.

Account window

Account shows the balances of the replay's simulated account. Its header has the List and Row buttons and two gears. The figures below are its rows. A new window shows the first seven, and the settings list them under Rows, where Add row… adds any of the others.

Commission, ECN, SEC fee, FINRA TAF and Locates add up to Fees. A figure the replay has not sent shows a dash. Hover a figure for what it holds. When the legacy Pattern Day Trader rule is on and the account has used its day trades, a line beginning PDT restricted shows under the figures. While the replay day is locked by your daily loss limit, a red banner sits above the figures, as the next section says.

Daily loss limit and the lock

The Display tab of the Account window's settings, behind the second gear, holds the Daily loss limit and At the limit. Both are kept on your account, not in the layout, so they apply in every replay and every Account window. The limit counts as reached when the day's Net P&L, realized and unrealized after fees, falls to minus the limit or below.

The lock lasts until the end of that replay day. Reset account does not lift it. Changing the limit or the choice does not lift it either: a change made while locked applies from your next replay day, and the hint under At the limit says so. Rewinding a Practice replay to a moment before the lock tripped lifts it, because on that timeline the loss has not happened yet. If the day is still past the limit at the moment you land on, it locks again at once. On a Career day, going back only watches and does not lift it: Back to and the time returns you to where you left, still locked.

Settings: Columns tab

This tab is the same in all four windows. In Account the list is headed Rows and holds the figures. In Trades, while Rows is Per trade, it lists the per-trade columns. Hover a name in the list for what it holds.

In the table itself, drag a column heading onto another to move it, drag a heading's right edge to resize it, and double-click that edge to put the width back. The button columns keep a fixed width. Hovering a heading also says what the column holds.

Settings: Display tab

Each window has its own lines here. Sort by and Linked symbol only come last in every window, except that Account has no Sort by.

Settings: Appearance tab

Short words in a small window

On the Scalper layout these windows are short, so on most screens they draw smaller text and shorter words. Nothing is hidden for size: a table too narrow for its columns scrolls sideways.

Good to know