Draw on a chart
The drawing tools sit on the rail down the left edge of each chart. A drawing belongs to the stock and the replay day, not to one chart: every chart of that stock shows it once that chart has a bar at its time, and it is saved to your account as you draw. It stays on that stock's later days too, until you delete it.
Watch this guide as a video: Draw on a chart
Plays here, from YouTube, when you click.
Steps
- Pick a tool from the rail down the chart's left side. The first button holds the cursors, Cross and Arrow. The next six are the groups Trend line tools, Gann and Fibonacci tools, Patterns, Forecasting and measurement tools, Geometric shapes and Annotation tools. A group's button draws with the tool you last picked from its list, or the group's first tool until you have. For another, point at the button and click the small arrow in its corner, or press and hold the button, then click a tool in the list. The list shows each tool's key, such as Alt+T for Trend Line (⌥T on a Mac). On a short chart, the rail's lower buttons wait behind More drawing tools, the three dots at its foot.
- Place the drawing on the chart. For a Trend Line, Ray, Rectangle, Fib Retracement or a measure, press where it starts and drag to where it ends. A Horizontal Line or a Horizontal Ray takes one click at its price. For Text, click where the words go, type them and press Enter. Esc drops a drawing you are still making. Every point must sit over the bars: a press in the empty space right of the last bar does nothing.
- Click the drawing to select it. Once a drawing is placed the chart is on Arrow, unless Keep drawing on the rail is on, which keeps the tool for the next one. A selected drawing shows small circles on its points and a toolbar near the top of the chart. Shift-click or Ctrl-click (⌘-click on a Mac) adds another drawing to the selection. Click an empty part of the chart to let go.
- Drag it to move it, or drag one of its circles to change its shape. Dragging needs Arrow: with Cross a drag moves the chart. Hold Alt (⌥ on a Mac) as you start a drag to move a copy and leave the drawing where it was. With Arrow on, the arrow keys nudge the selected drawing instead of stepping the replay clock: left and right by one bar, up and down by one pixel of price, and ten at a time with Shift.
- Change its color, width and line style from the toolbar. From the left: the color square, the line width from 1px to 4px, the line style, solid, dashed or dotted, and the fill opacity on a filled shape such as a Rectangle. A change applies to every selected drawing. Then come the gear, which opens its settings, the alarm clock, which adds an alert to a line or zone that can carry one, the padlock, the crossed-out eye that hides it, the bin that deletes it and the three dots, which hold the rest of its right-click menu.
- Open its settings for the rest. Double-click the drawing, click the gear on its toolbar, or right-click it and choose Style…. The Style tab holds its color, width and line style, the tool's own Properties, such as Extend right on a Trend Line or the Levels of a Fib Retracement, and Apply as default, which starts every new drawing of that tool in this style. The Visibility tab picks the timeframes it shows on. Each change shows at once. With Arrow on, double-clicking a Text drawing edits its words in place instead.
- To delete a drawing, select it and press Delete. Backspace (⌫ on a Mac), the bin on its toolbar and Delete on its right-click menu do the same; the keys work with Arrow on. It goes at once, from every chart of the stock, and Ctrl+Z (⌘Z on a Mac) brings it back. A locked drawing is not deleted until you unlock it.
- To clear the chart, click the rail's last button, Remove drawings or indicators, then Remove drawings. On a short chart that button is behind More drawing tools. With more than one drawing to remove it asks first, saying Ctrl+Z brings them back. Locked drawings stay. A Mac shows ⌘Z. Click Remove. Every drawing on the chart that is not locked goes, hidden ones too, and it goes from every chart of the stock. That takes the lines carried over from earlier days as well, and they go from those days too.
The drawing rail at a glance
- The cursors: Cross is the plain crosshair with no tool armed, and Arrow selects and moves drawings.
- Trend line tools: lines, channels and pitchforks. Click the button to draw with its last used tool. Its corner arrow, or a long press, lists every tool in the group, as here. The star beside a tool puts it on a small bar you can drag anywhere on the chart.
- Gann and Fibonacci tools.
- Patterns: chart patterns, Elliott waves and cycles.
- Forecasting and measurement tools: forecasting, volume-based tools and measurers.
- Geometric shapes: brushes, arrows and shapes.
- Annotation tools: text and notes.
- Measure arms the Date and Price Range tool.
- With Zoom in, drag a box on the chart to zoom to it. Press Esc to cancel.
- More drawing tools holds the rail's buttons that do not fit on a short chart.
A trend line, selected
- One end of the line, with its circle. Drag a circle to move that end alone.
- The other end. To move the whole line, drag it anywhere away from its circles.
- The color square, the first button of the line's toolbar. The line width and the line style come after it.
- The gear opens the line's settings.
- The padlock locks the line, so it cannot be moved or deleted until you unlock it.
- The bin deletes the line, from every chart of the stock. Ctrl+Z (⌘Z on a Mac) brings it back.
Good to know
-
The tools a day trader reaches for
In Trend line tools: Trend Line (Alt+T, ⌥T on a Mac), Ray, which runs on to the chart's right edge, Horizontal Line (Alt+H, ⌥H on a Mac) across the whole chart and Horizontal Ray (Alt+J, ⌥J on a Mac), which starts where you click. In Geometric shapes: Rectangle (Alt+Shift+R, ⌥⇧R on a Mac) to mark a zone. In Gann and Fibonacci tools: Fib Retracement (Alt+F, ⌥F on a Mac). In Forecasting and measurement tools: Long Position, Short Position and the measures Price Range, Date Range and Date and Price Range. In Annotation tools: Text and Callout. Right-clicking the chart at a price and choosing Draw horizontal line here draws a level at once.
-
Measure a move
Click Measure on the rail, then press at one point and drag to another. The box shows the change in price with its percent, and the bars and the time between the two points. It stays on the chart like any drawing until you delete it.
-
Draw a Fib Retracement
Press where the move started and drag to where it ended. Level 1 sits where you pressed and 0 where you let go, with 0.236, 0.382, 0.5, 0.618 and 0.786 between them, each with its price. For a pullback after a run up, press at the low and drag to the high.
-
Plan a trade with Long Position or Short Position
Press at your entry and drag to your target. The stop is set half as far from the entry on the other side, so the reward starts at twice the risk. Drag any of the three to move it, and the box shows the reward as a multiple of the risk. It places no order.
-
Snap points to the bars
Magnet on the rail snaps a point you place, or a circle you drag, to the bar's open, high, low or close. Each click steps it from off to weak, which snaps only when you are near one, to strong, which always snaps. Moving a whole drawing never snaps. It is off again after a reload.
-
Lock, hide and show again
The padlock on a drawing's toolbar, or Lock on its right-click menu, stops it being moved or deleted, and Remove drawings leaves it. Hide takes it off every chart of the stock without deleting it. To bring hidden drawings back, right-click an empty part of the chart and choose Show hidden drawings, with the number hidden after it; Object tree… on the same menu lists every drawing on the chart, hidden ones too. Hide all drawings on the rail, or Ctrl+Alt+H (⌥⌘H on a Mac, which is also the Mac's own key to hide other apps), hides them on this chart only, until you turn it off or reload. Lock all drawings on the rail only stops drawings being dragged or nudged on this chart: the Delete key, Remove drawings and the toolbar still act.
-
Copy a drawing
With Arrow on, Ctrl+C and Ctrl+V (⌘C and ⌘V on a Mac) copy and paste the selected drawing, and Ctrl+D (⌘D on a Mac) puts a copy beside it. Its right-click menu has Clone and Copy, and the chart's own menu has Paste drawing. A paste on another chart keeps the same time and price, so on another chart of the same stock it lands right on top of the first.
-
Undo
Ctrl+Z (⌘Z on a Mac) undoes the chart's last change, to its drawings, its indicators or its settings, and Ctrl+Shift+Z (⇧⌘Z on a Mac) redoes it. Click the chart first. Each chart keeps its own list of changes, and a drawing changed on another chart of the same stock clears the drawing changes from this chart's list.
-
Other charts, other timeframes, other days
Every chart of the stock shows the drawing, and a change on one shows on the others, but a chart draws it only once it has a bar at or after the drawing's first point. So the daily chart shows a line drawn today from the next replay day on, and a Horizontal Line at once. It is saved to your account, so it is there after a reload, in another browser and each time you replay that day. Jump the clock back and it stays, drawn again once the chart's bars reach its first point. On a later day of the same stock it is still there at the time it was drawn, moved for any split in between, so scroll back to see a short line from an earlier day; a Horizontal Line or a Horizontal Ray reaches today. It never shows on an earlier day. It is still one drawing: move or delete it on a later day and it moves or goes on its own day too, and if Ctrl+Z (⌘Z on a Mac) brings it back, it comes back as a drawing of the day you are on.
-
The right-click menu on a drawing
Add alert… on a line or zone that can carry one, then Style…, Apply as default, Clear default, Apply template, Clone, Copy, Lock, Hide, Order with Bring to front and Send to back, and Delete. The rows under them are the chart's order rows at the price under the pointer: a click there places an order, not a drawing.
-
Keys
Click the chart first. Each key is written as on Windows, then on a Mac. Alt+T or ⌥T Trend Line, Alt+H or ⌥H Horizontal Line, Alt+J or ⌥J Horizontal Ray, Alt+V or ⌥V Vertical Line, Alt+C or ⌥C Cross Line, Alt+F or ⌥F Fib Retracement, Alt+Shift+R or ⌥⇧R Rectangle. Ctrl+Alt+H or ⌥⌘H hides or shows every drawing on this chart, though ⌥⌘H is also the Mac's own key to hide other apps. The left and right square bracket keys step through the tool groups. With Arrow on, Enter opens the selected drawing's settings and Esc lets go of it. A trade hotkey on the same key wins.