Order ticket settings
The order ticket is the panel you send orders from. A new account's desk holds Order ticket (classic), a fixed grid of eight boxes over four side buttons, and this page describes that one first. The ticket has no settings dialog of its own: its defaults are in Replay settings under Order entry, they are saved to your account, and every open ticket uses the same ones.
Where the settings are
The ticket has no gear of its own. In a replay, click the gear button at the top of the screen or press Ctrl+, (⌘, on a Mac), then choose Order entry; Search and commands (Ctrl+K, ⌘K on a Mac) has Open replay settings… too. A change applies at once to every open ticket and is saved to your account a moment later, with no Save button. Default qty, Qty step, Tick and Size buttons are taken when you click out of the box.
The ticket at a glance
- The symbol box: type a ticker to point the ticket, and every panel in its link group, at that stock.
- Quantity, in whole shares. The arrows beside it move it by your Qty step, and the ▾ button lists your Size buttons.
- Order type: the kind of order. The menu is grouped Basic, Stop family, Multi-leg and Auction.
- Route: where the order is sent. A ticket starts on your Default route.
- Time in force: when the order may work. The options are DAY, DAY+, IOC and FOK.
- The link group: panels in the same group show the same stock.
- The four price boxes: Price, Stop, Low price and High price. A box the chosen order type does not use stays in place and goes dim.
- The four side buttons: Buy, Sell, Short and Cover. They follow your position in the stock, so only the ones that apply are lit. Each shows its hotkey when you have set one.
- The line under the buttons. It says why a side is dimmed, or what is wrong with a box you filled in.
Order entry in Replay settings
- The title bar: drag the window by it.
- The sections of the window. Order entry holds the ticket's defaults.
- Where these settings are kept: on your account, so every ticket in every replay uses them.
- A read-only list of your current values. The controls that change them come below it.
The Order entry controls
- Default order type, Default time-in-force, Qty step and Default route: what a ticket starts on, and how many shares the Quantity arrows move it by.
- Default qty, Tick and AUTO. Default qty is the share size a ticket starts with. Tick is the price step, and with AUTO ticked the step follows the price instead.
- Size buttons: up to six share sizes. They fill the Quantity presets menu on the classic ticket.
- Stop offset and Target offset: how far from the entry a bracket's stop-loss and take-profit are set when you leave them blank.
- Level 2 click: what a click on a Level 2 size cell does.
- Three tick boxes: Ask my conviction before an opening order, Ask before orders that fill immediately and Re-route unfilled SMART orders.
Order ticket (classic): the grid
This is the ticket on a new account's Scalper desk. Its eight boxes never move: a box the chosen order type does not use stays in place, goes dim, and tells you when you point at it, for example Not used by a market order.
- Symbol box The unlabeled box at the top left. Type a ticker to point the ticket, and every panel in its link group, at that stock.
- Link group The chain icon at the top right. Panels in the same group show the same stock. The options: Gray, Blue, Violet, Teal, Unlinked. Default: Gray.
- Quantity The size, in whole shares. The arrows beside it, and the Up and Down keys, move it by your Qty step and never below one share. Default: 100, from Default qty.
- Quantity presets The ▾ button beside Quantity. It lists your Size buttons, and picking one sets Quantity. It never sends an order. With no size buttons set it is dim and says No size buttons set. Add them in Settings, then Order entry. Default: 100, 200, 500, 1000.
- Order type The kind of order. The menu is grouped Basic, Stop family, Multi-leg and Auction, and each type is listed in the next section. Default: Limit, from Default order type.
- Route Where the order is sent. The first entry is the replay's default exchange, shown as its code and the word default, such as XNAS · default. Then comes SMART, then the other exchanges in the stock's book. What you pick here is not saved, and the ticket starts on your Default route. It is locked for the auction order types. Default: SMART.
- Time in force When the order may work. The options: DAY, DAY+, IOC, FOK, each listed below. An auction order type sets it to DAY and locks it. It stays on DAY after you go back to another order type, so set it again if you want DAY+. Default: DAY+, from Default time-in-force.
- Price The limit price for Limit, Marketable limit, Limit-on-open and Limit-on-close. For Stop-limit it is the price the order rests at once triggered, and for Bracket (OTO) the entry limit. A Level 2 click fills it when Level 2 click is set to load the price. If Order type is on a type with no limit price, such as Market, Stop, Trailing stop or Range, that click also switches Order type to Limit. The arrows step it by one tick, and every price is rounded to your Tick when you send.
- Stop The trigger price for Stop and Stop-limit. For Trailing stop it holds the trail amount, and for Bracket (OTO) an entry stop you may leave blank.
- % A button inside the Stop box, shown for Trailing stop. When it is off, the trail is a price amount. When it is on, the trail is a percent and the arrows step it by 0.1. Default: off.
- Low price The lower exit price of a Range or a Bracket (OTO). Which exit it is depends on the side you press. For Sell or Short it is the stop of a range and the take-profit of a bracket. For Buy or Cover it is the take-profit of a range and the stop-loss of a bracket. It must be below High price.
- High price The upper exit price, the other half of the pair. For Sell or Short it is the take-profit of a range and the stop-loss of a bracket. For Buy or Cover it is the stop of a range and the take-profit of a bracket.
On a narrow ticket the grid folds from four columns to two. If Low price is not below High price, the ticket refuses with Low price must be below High price.
Order type menu
The choices in Order type, in the menu's order, with the boxes each one uses on the classic ticket. What each order means in trading terms is in the Order types glossary entry.
- Market In the Basic group. It buys or sells at the best price there is and uses no price box.
- Limit In the Basic group. It rests at your price or better and uses the Price box.
- Marketable limit In the Basic group. A limit priced at or through the other side of the quote, to fill now with a cap on the price. It uses the Price box.
- Stop In the Stop family group. It becomes a market order once the stock trades at your stop, and uses the Stop box.
- Stop-limit In the Stop family group. Once the stock trades at your stop, a limit order rests at your price. It uses the Stop and Price boxes.
- Trailing stop In the Stop family group. A stop that follows the price at a set distance. It uses the Stop box for the distance, as a price amount or, with % on, a percent.
- Bracket (OTO) In the Multi-leg group. An entry with a take-profit and a stop-loss attached. Price is the entry limit and Stop an entry stop; leave both blank to enter at the market. Low price and High price are the two exits. Leave one blank and it is set from your Stop offset or Target offset, which needs an entry price in Price or Stop.
- Range In the Multi-leg group. Two exits around a position you hold, a take-profit and a protective stop. When one fills, the other is cancelled. It uses the Low price and High price boxes, and needs both.
- Market-on-open In the Auction group. A market order for the opening auction. It uses no price box.
- Limit-on-open In the Auction group. A limit order for the opening auction. It uses the Price box.
- Market-on-close In the Auction group. A market order for the closing auction. It uses no price box.
- Limit-on-close In the Auction group. A limit order for the closing auction. It uses the Price box.
With an auction type chosen, the ticket says under the buttons where the order crosses, and warns when the stock has no auction data on the day you are replaying.
Time in force menu
- DAY An order for the regular session. Sent in the pre-market, it waits for the open.
- DAY+ Like DAY, and it can also fill in the pre-market and after-hours sessions. A new account's tickets start on it.
- IOC Short for immediate or cancel. It fills what it can at once and cancels the rest.
- FOK Short for fill or kill. It fills in full at once or not at all.
Buttons under the grid
The four side buttons follow your position in the stock: only the ones that apply are lit, and a dimmed button says why when you point at it. Each shows its hotkey when you have set one.
- Conviction A row of buttons, 1 to 5, above the side buttons. It shows only when Ask my conviction before an opening order is on and you have no open position in the stock. Your answer is sent with the order. Click the same number again to clear it.
- Buy Sends a buy order. It is lit while you are flat or long.
- Sell Sells shares you hold. It is lit only while you are long, and refused for more than you hold.
- Short Sends a sell that opens a short or adds to one. It is lit while you are flat or short.
- Cover Sends a buy that closes a short. It is lit only while you are short, and refused for more than you are short.
- Replace Takes the place of the four side buttons while you change a working order, after you press Replace on its row in Orders. It reads Replace Buy or Replace Sell with the ticker. A new price or size moves the same order. A new type, time in force or route cancels it and sends a new one.
- Cancel Found on the Modifying line above the buttons. It leaves the working order as it was and clears the ticket.
- Locate Appears beside Can't short: hard to borrow. Buy a locate first. The button reads Locate and a share count, and opens the Short locate window with the stock and shares filled in.
Under the buttons, a line of text says why a side is dimmed, when the session of the day you are replaying would refuse the chosen order, and what is wrong with a box you filled in. Until the replay is connected the buttons are off and the ticket says why, for example Connecting. The ticket arms in a moment.
Order ticket: the compact one
Order ticket, without the word classic, is a second panel that sends the same orders, with the same order types, times in force, routes and side buttons. It shows a price box only when the order type uses one, and names each box for its job.
- Type The Order type menu under a shorter name. TIF, Route and Qty beside it are Time in force, Route and Quantity. This ticket has no Quantity presets menu, so your Size buttons do not show on it.
- Limit The box for the limit price. Bid and Ask beside it set it to the current bid or ask in one click.
- Stop The trigger price for Stop and Stop-limit.
- Stop limit For Stop-limit, the price the order rests at once triggered. The classic ticket uses Price for this.
- Trail $ For Trailing stop, the trail as a price amount. Press % beside it and the box reads Trail % and takes a percent. The classic ticket uses Stop for this.
- Entry limit (optional) For Bracket (OTO), the entry limit. Entry stop beside it is optional too. Leave both blank to enter at the market.
- Take-profit For Bracket (OTO), the profit exit. Left blank, the box shows the offset it would use, such as offset 20¢. For Range, the limit exit.
- Stop-loss For Bracket (OTO), the loss exit. Left blank, the box shows the offset it would use, such as offset 10¢.
- Protective stop For Range, the stop exit.
The Scanner day and Classic built-in layouts hold this ticket. On any other desk, click + Panel and pick Order ticket; Replace in the Orders window also opens one when no ticket is open.
Order entry: Defaults
These are in Replay settings, under Order entry. The section starts with a read-only list of your current values, and the controls come below it in this order.
- Default order type The order type a ticket starts on. The options: Market, Limit, Marketable limit, Stop, Stop-limit, Trailing stop, Market-on-open, Limit-on-open, Market-on-close, Limit-on-close. Bracket (OTO) and Range cannot be the default. Trade hotkeys do not use this setting. Default: Limit.
- Default time-in-force The time in force a ticket and a new preset start on, and the one a hotkey uses when neither the key nor its preset names one. The options: DAY, DAY+, IOC, FOK. Default: DAY+.
- Qty step How many shares the arrows beside Quantity move it by. It takes a whole number, 1 or more. An entry below 1 is ignored and the saved step stays. Default: 100.
- Default route The route a ticket starts on, and the one hotkeys and Flatten use. The options: None (exchange default), SMART, then each exchange the open replay has shown. None names no route, so the order goes to the replay's default exchange. With SMART the app picks the exchange where your order would sit nearest the front of the queue at its price. An exchange you saved that this replay has not shown stays in the menu, marked unavailable. Default: SMART.
- Default qty The share size a ticket starts with, and the size a hotkey sends when neither the key nor its preset names one. It takes from 1 to 1,000,000,000. It is saved when you press Enter or click out of the box. An empty or invalid entry puts the saved size back. Default: 100.
- Tick The price step, such as 0.01 or 0.05. With AUTO unticked, every order price is rounded to it, a price loaded from Level 2 included, and the price arrows step by it. Default: 0.01, with AUTO on.
- AUTO A tick box beside Tick. When it is ticked, prices round to 0.0001 under 1.00 and to 0.01 at 1.00 and above, no matter what Tick holds. Untick it to use the step you typed. Default: on.
- Size buttons Up to six share sizes, typed with commas or spaces and kept in the order you type them. They fill the Quantity presets menu on the classic ticket and the size row in the Short locate window. Clear the box to have none. Default: 100, 200, 500, 1000.
- Stop offset How far from the entry a bracket's stop-loss is set when you leave it blank. It takes a number and a unit, ¢ for cents or % for percent. ATR is shown but cannot be chosen yet. A new bracket preset starts from it. Default: 10 ¢.
- Target offset The same for a bracket's take-profit. Default: 20 ¢.
- Level 2 click What a click on a Level 2 size cell does. The options: Loads the price into the order ticket, Sends a one-click order, Sends after a confirm. The B/S buttons in Level 2, your Buy and Sell keys, and Buy at and Sell at in a row's menu send in all three, after a confirm in the third. Default: Loads the price into the order ticket.
- Ask my conviction before an opening order Adds the Conviction row, 1 to 5, above the side buttons while you have no open position in the stock. Default: off.
- Ask before orders that fill immediately A change to a working order, a hotkey that carries a price, or an order moved on the chart that would fill or trigger the moment it lands asks first. A hotkey that sends a market order is not asked. The question has Send and Cancel, and Send as Day+ for a DAY limit that would wait for the open. Ticking Don't ask again and sending turns this setting off. A new order typed into the ticket is not asked. Default: on.
- Re-route unfilled SMART orders A SMART order still unfilled after 30 seconds of replay time is moved to the exchange where the stock is trading, at the back of that queue. Default: on.
- Model limits A fold-out list of what the fill model does not capture. It shows only while a replay is open.
- Trade hotkeys… A button that jumps to the Hotkeys section.
Order entry: Saved presets
A preset is a named order that a trade hotkey can send: pick it in the key's Preset menu in the Hotkeys section. Saved presets are listed first, or the line No saved presets yet, and the form that adds one comes after.
- Preset name Each saved preset's name, in a box you can edit. Beside it the row shows the preset's type, size and time in force. For a bracket it also shows the two offsets, and R:R, the risk to reward they make, when both use the same unit.
- bracket A tick box on each saved preset and in the form. When it is ticked, the preset carries a stop and a target, shown as STOP and TARGET and filled from your Stop offset and Target offset. Each takes a number in ¢ or %. When it is unticked, both are removed. Default: off.
- ✕ Deletes the preset at once.
- Name The new preset's name, up to 60 characters. A preset with no name is not added.
- Type The new preset's order type, from the same list as Default order type. A key cannot send a preset whose type is Stop-limit, Trailing stop or one of the four auction types. Default: Limit.
- Qty The new preset's size in shares, 1 or more. Default: 100.
- TIF The new preset's time in force. The options: DAY, DAY+, IOC, FOK. Default: your Default time-in-force.
- Add preset Saves the preset to the list. You can keep up to 100.
Good to know
- Order entry settings are saved to your account, not to a ticket or a replay, so every ticket in every replay uses them. A saved layout keeps a copy from the moment you saved it and brings that copy back when you switch to it. A built-in layout leaves them alone.
- A changed default reaches a ticket only if you have not typed in it yet. A ticket you have started filling in keeps what it holds.
- The side buttons follow your position. With no position Buy and Short are lit, with shares held Buy and Sell, and with a short Short and Cover. Until your position has loaded all four are off and the ticket says Position not loaded yet. Orders wait until it loads.
- A price that rounds to zero at your tick is refused with Price rounds to zero at this tick size. The most one order can carry is 1,000,000,000 shares.
- Session hours, the short sale restriction and other market rules are those of the day you replay. When one of them stops an order, the ticket tells you under the buttons, or a message at the bottom right gives the reason once you send. Some of those messages carry a button that sends a corrected order. The rules themselves are in the glossary.