App settings and layouts
Replay settings is the window behind the gear on the replay's top bar. It holds your hotkeys and order entry settings, what a new replay starts with, each replay's simulated account and fees, density, display size and theme, sounds, and your saved layouts. Some of it is kept on your account, some belongs to one replay and some stays in this browser, and each section below says which.
Where the settings are
On the Replay page, click the gear on the top bar, press ⌘, (Ctrl+, off a Mac), or choose Open replay settings… in the command palette. The window floats over the desk: drag it by its title bar, and close it with the × or Esc. Appearance, Sounds and Layouts apply at once. Under Account & fees, each of the three forms has its own save button.
Replay settings at a glance
- The window floats over the desk: drag it by its title bar.
- The × closes the window, and so does Esc.
- The sections of the window, in this order: Hotkeys, Order entry, Account & fees, Appearance, Sounds and Layouts.
- New replays: what each new replay starts with. It is kept on your account and has its own Save button.
- This replay: the simulated account of the replay in the active tab. A change takes effect the next time the replay is resumed.
The foot of Account & fees
- Save settings keeps the six fields of This replay. They apply when you resume the replay.
- Reset account starts this replay's account again at the time you are on. It asks first and cannot be undone.
- Fees: the fees of the replay in the active tab, Per-share commission and Per-trade fee.
- Save fees keeps the two fees for this replay. They apply when you resume it.
The Layout menu at a glance
- Layout, at the right end of the row of screen tabs, opens this menu.
- Built-in: the ready-made layouts. Picking one rebuilds the screen and leaves your order entry settings and hotkeys alone.
- Saved: your saved layouts. Click one to switch to it. The tick is beside the layout the screen shows.
- The small button at the end of a saved layout's row opens that layout as a new screen in its own window.
- Save layout writes the screen's arrangement, and your current order entry settings, presets and hotkeys, over the saved layout it shows. It is grayed out while the screen shows a built-in layout.
- Save as… opens Save layout as. Type a name and click Save or press Enter.
- Rename layout… renames the saved layout the screen shows.
- Delete deletes the saved layout the screen shows, at once.
Sections of the window
These are listed down the left side of the window, in this order.
- Hotkeys Holds your trade hotkeys. The hotkey settings page covers them.
- Order entry Holds order defaults, presets and the ticket. See Order ticket settings.
- Account & fees Holds New replays, This replay and Fees.
- Appearance Holds Density, Display size and Theme.
- Sounds Holds Volume, the sounds for your own orders, your uploaded sounds and the built-in sounds.
- Layouts Holds your saved layouts and Window placement.
Account & fees: New replays
This form sets what each new replay starts with. It needs no replay open and is kept on your account.
- Starting balance The cash a new Practice replay opens with, in dollars, from 0 to 100,000,000. A Career replay opens on its career's balance instead. Default: 30000.00.
- Buying power × Buying power is the balance times this number. It can be any number from 1 to 10, such as 4 or 2.5. A Career replay uses its career's multiplier instead. Default: 4.
- Start at (ET) The time on the clock when a new replay opens, in New York time: Pre-market 04:00, Market open 09:30 or Another time. Another time shows a field for a time from 04:00 to 19:59, written as HH:MM. Default: Pre-market 04:00.
- Speed The speed a new replay plays at: 0.5×, 1×, 2×, 3×, 5× or 10×. Default: 1×.
- Save Keeps these four settings. Your next new replay starts with them. A replay that is already open does not change.
Account & fees: This replay
This is the simulated account of the replay in the active tab. A change is kept when you click Save settings and takes effect the next time the replay is resumed, not while it runs. Resumed means opened again after you closed its tab, or brought back with the Resume button after it was paused or put to sleep. Pausing the clock and pressing play is not a resume. With no replay open, the section says: Open a replay to change its own buying power, margin and fees.
- Starting balance The opening cash for the replay, in dollars, from 0 to 100,000,000. Default: 30000.00, or what you saved under New replays.
- Intraday margin multiplier Buying power is the balance times this number, from 1× to 10×. It is the number New replays calls Buying power ×. Default: 4, or what you saved under New replays.
- When an order exceeds buying power Reject the order, or Downsize to the largest size it allows. Default: Reject the order.
- Mark open P&L to The price an open position is valued at: The bid for a long, the ask for a short, or The last print. The Positions window's Mark column and every P&L figure follow it. Default: The bid for a long, the ask for a short.
- Short margin on stocks under 5 dollars When this tick box is on, a short in a stock priced under 5 dollars uses buying power with no leverage: 2.50 a share, or the full price if that is more. Shorts at 5 dollars and over are not affected. Default: On.
- Enforce the legacy Pattern Day Trader rule When this tick box is on, the Pattern Day Trader rule is enforced on this replay's account. It starts off for every replay, on any replayed day, including days when the rule was in force. Default: Off.
- Save settings Keeps the six fields above for this replay. They apply when you resume it.
- Reset account Starts this replay's account again at the time you are on. The clock does not move. It asks first, with Keep it and Reset the account, and cannot be undone. It clears your positions, working orders, locates and the day's executions, and puts the balance back to where the replay started. Trades you have already closed stay in your journal.
On a Career replay the balance and the multiplier are the career's, and a change to either is refused. Reset account on a Career replay closes what you hold at the market first and makes the replay Practice.
Account & fees: Fees
These are the fees of the replay in the active tab. They apply when you resume it.
- Per-share commission The dollars charged per share, from 0 to 10, with up to 9 decimals. Amounts under a cent are allowed. Zero means no commission. Default: 0.005.
- Per-trade fee A flat dollar amount for each executed order, from 0 to 10000. Zero turns it off. Default: 0.
- Save fees Keeps the two fees for this replay.
Appearance
These apply at once and are kept in this browser.
- Density Where every panel starts: Comfortable (roomy rows and text), Compact (a little tighter everywhere) or Dense (the most on screen). A small panel tightens further on its own. The same control is on the top bar. Default: Compact.
- Display size How big the whole desk is drawn: Auto (fits your screen), 90%, 100%, 110% or 125%. The same control is on the top bar. Default: Auto (fits your screen).
- Theme Light, Dark or System, which follows your computer. The button shows a sun or a moon and no word. Default: Dark.
If you picked the experienced start on your first visit, Density was set to Dense for you.
Sounds: Volume
One level for every sound: your orders, scanners, alerts, chart alerts and the spoken symbol. It is kept on this device.
- Volume A slider from 0 to 100% in steps of 5. Default: 70%.
- Mute Silences every sound, after which the button reads Muted and the level reads Off. Default: Off.
- Test Plays the default sound at the level you set.
Sounds: Your trading
What plays for your own orders, whether they come from a hotkey, the ticket, a chart, a panel or a script. Each row has an On and Off switch and a sound picker. These follow your account.
- Filled Plays when an order finishes filling. It has one sound for Buys and one for Sells. Default: On, with Rise for Buys and Fall for Sells.
- Rejected Plays when an order of yours is rejected or refused. Default: On, with Soft alarm.
- Partly filled Plays when a fill leaves shares still working. Default: Off, with Tick.
- Cancelled Plays when you cancel an order, or it expires. Default: Off, with Wood block.
- Stop or target hit Plays instead of Filled. Default: Off, with Marimba.
- Halt and resume Plays for a stock you hold or have on a chart. Default: Off, with Radar.
A sound picker lists the built-in sounds, Say the symbol, your own sounds, and Upload your own…, which opens this section.
Sounds: Your sounds and Built-in sounds
- Upload a sound Adds a sound of your own from an MP3, WAV, OGG or M4A file of up to 1 MB and 5 s. Name it, play it, then click Add sound. It follows your account and shows in every sound picker. You can keep up to 20.
- Your sounds The list of your uploads, each with a play button and a delete button. Delete acts at once, without asking first. A scanner or alert still set to a deleted sound plays the default.
- Built-in sounds Click one to hear it: Chime, Glass, Bell, Ding, Marimba, Pop, Click, Tick, Blip, Double tap, Rising triad, Rise, Fall, Droplet, Wood block, Sparkle, Radar, Soft gong, Soft alarm or Classic beep. What a scanner, an alert or a chart alert plays is chosen where you set it up. Default: Chime.
- Say the symbol Speaks the ticker letter by letter, in a browser that can speak.
Layouts section
This section lists your saved layouts. Rename and Delete work anywhere. The other buttons need the Replay page open, and elsewhere the section says: Open the Replay workspace to switch layouts.
- Workspace layouts The list of your saved layouts, with a tick beside the one the screen shows. With none it reads: No saved layouts yet.
- Switch Rebuilds the screen from that layout and brings back the order entry settings, presets and hotkeys saved with it.
- Open as window Opens that layout as a new screen in its own browser window. Like Switch, it also makes the order entry settings, presets and hotkeys saved with that layout your current ones.
- Rename Renames the layout in place. Enter keeps the new name. Esc or a click elsewhere drops it.
- Delete Deletes the saved layout at once, without asking first.
- Save layout Writes the screen's arrangement over the saved layout it shows, together with a fresh copy of your current order entry settings, presets and hotkeys. It is grayed out while the screen shows a built-in layout. In that case use Save as… instead.
- Save as… Asks for a name and saves the arrangement as a new layout, which becomes the one the screen shows.
- Window placement A switch that asks your browser to let the desk place windows on your other monitors. Once on, windows return to the monitor you left them on. After the browser has allowed or blocked it, change it in the browser's site settings, not here. Default: Off.
The Layout menu
Layout is at the right end of the row of screen tabs. The same list, without the small window buttons, is under Layout when you right-click a panel's tab.
- Built-in The ready-made layouts: Scalper, Scanner day, Research and Classic. Picking one rebuilds the screen and leaves your order entry settings and hotkeys alone. A new account opens on Scalper. Default: Scalper.
- Scalper Time & sales runs down the left. Positions, Account, Orders, Trades, Level 2 and the classic order ticket are in the middle. Charts at 1m, 5m, 10s and daily are on the right, with Scanner and Price alerts as tabs behind the daily chart.
- Scanner day Watchlist over News, a chart over the Scanner, Level 2 over Time & sales, and the order ticket with Orders, Trades, Positions and Account.
- Research Company info over Watchlist, a daily chart over a 5m chart, and News over Notes.
- Classic Watchlist over News, the chart, Level 2 over Time & sales, and a column with the order ticket, Orders, Trades, Positions, Account, Company info and Notes.
- Saved Lists your saved layouts. Click one to switch to it. The small button at the end of its row opens it as a new screen in its own window. Either way the order entry settings, presets and hotkeys saved with it become your current ones.
- Save layout Writes the screen's arrangement, and your current order entry settings, presets and hotkeys, over the saved layout it shows. It is grayed out while the screen shows a built-in layout.
- Save as… Opens Save layout as. Type a name and click Save or press Enter.
- Rename layout… Renames the saved layout the screen shows.
- Delete Deletes the saved layout the screen shows, at once.
- Reset workspace layout Found at the foot of the + Panel menu, and under Layout on a panel tab's menu. It rebuilds the screen from the built-in layout you picked last, without asking first. No saved layout is changed. If the screen was showing a saved layout, that layout stays ticked, so Save layout afterwards would write the rebuilt arrangement over it.
Pop-outs and screens
- Pop out The small button at the right end of a panel's row of tabs. Its hint reads Pop out and the panel's name. The panel opens in its own browser window. Close that window and the panel returns to the desk. You can also drag a panel's tab out of the browser.
- Open in a window Found in a screen tab's menu and in the + Panel menu. It moves the whole screen into its own browser window. The item then reads Return to the strip, which brings it back.
- New screen Found in the plus menu after the screen tabs and in the + Panel menu. It adds a screen built from your built-in layout.
- Empty screen This item in the plus menu adds a screen with no panels.
- From a saved layout This item in the plus menu adds a screen built from the saved layout you pick. It also makes the order entry settings, presets and hotkeys saved with that layout your current ones.
You can keep up to 8 screens, and your only screen cannot be closed.
Link groups
A link group decides which symbol a panel follows. Click the chain icon in a panel's header to open the Link group menu.
- Link group The choices are Gray, Blue, Violet, Teal or Unlinked. Panels in the same group show the same symbol: change it in one and the others follow. The choice is saved with the layout. Default: Gray.
- Gray The group every panel starts in, so an untouched desk follows one symbol. Its chain is faint and carries no name.
- Blue, Violet, Teal These are the color groups. A panel in one shows its chain in that color with the group's name beside it.
- Unlinked The panel keeps its own symbol and nothing else changes it. Its chain is drawn broken, and its hint reads Not linked.
A panel tab's right-click menu
- Density Auto, Comfortable, Compact or Dense, for this one panel. Auto follows the desk's Density and names it, such as Auto (Compact). The others set where this panel starts. The choice is saved with the layout. Default: Auto.
- Add panel Shows the same list as the + Panel button.
- Layout The Layout menu above, with Reset workspace layout at its foot.
- View Shows and hides the desk's bars.
Good to know
- Where each thing is kept. On your account: saved layouts, your uploaded sounds, the sounds for your orders, your hotkeys, presets and order entry settings, and what new replays start with. On one replay: its account and fees. In this browser: Density, Display size, Theme, the volume and mute, your screens and working arrangement, and the built-in layout you picked.
- A saved layout holds the arrangement, each panel's own settings, link group and density, the panels you had popped out, and a copy of your order entry settings, presets and hotkeys. Switching to it makes that copy your current settings. A built-in layout changes none of them.
- New replays sets the balance and buying power of Practice replays. A Career replay opens on its career's balance and multiplier, and This replay refuses a change to either with: This replay runs on your career's account. Open a practice replay to try a different balance or leverage.
- Changes under This replay and Fees are kept when you save them, but they do not reach a replay while it is running. They take effect the next time the replay is resumed: when you open it again after closing its tab, or press Resume after it was paused because you opened another replay or were away. Pausing the clock and pressing play does not apply them.
- Replay settings opens only on the Replay page, and after a reload it opens on Hotkeys. Your profile and password are under Settings in the left rail, and the journal has its own Settings at the foot of its sidebar. Start over is under Settings in the left rail too, in its Danger zone tab. It deletes every replay, trade, note and career after asking you to confirm, and keeps your settings, layouts, scanners, watchlists and playbooks. Reset account, by contrast, clears one replay's account and leaves closed trades in the journal.