Watchlist settings
The Watchlist window shows one of your saved watchlists on the replay desk, with each value read at the replay clock. It has no gear and no settings dialog: you pick the list and the link group in its header, and you set a list's columns, color themes and symbol order on the Watchlists page. Lists and their columns are kept on your account, and which list a window shows is kept with that window in your layout.
Where the settings are
There is no settings dialog to open and no key. The window's controls are in its header, on its rows, in a row's right-click menu and in the right-click menu of its tab. To change a list's columns, click Watchlists in the left rail, open the list and click Columns. Changes in the column setup wait for Save columns. Everything else on this page is saved at once.
The Watchlists page at a glance
- The list's name: click it, or the pencil beside it, to rename the list.
- Add a symbol: type a ticker and press Enter or click Add. A list holds up to 200 symbols.
- Columns shows or hides the column setup, which is open here on the right.
- More for this list, the three dots. Its menu holds Rename and Delete list.
- The moment the numbers are from. With a replay open it is that replay's clock.
- The column headings: click a number column's heading to sort by it, for looking only. Drag a heading's right edge to set its width, or drag a heading onto another to move the column.
- A row: one symbol. Point at it for the arrows that move it one place in the saved order and the cross that takes it off the list.
- A column in the setup: its Color theme menu, which paints each cell by its value, the arrows that move the column and the cross that removes it. Symbol cannot be removed.
- Add columns opens a searchable list, and the one you pick is added as the last column.
- Save columns saves the setup and closes it. Changes in the setup wait for it. Use the default columns puts the list back to Symbol, Last, Chg %, Vol and RVOL and saves at once.
The Watchlist window
- The list the window shows. With one list it is that list's name. With more than one it is a menu that picks the list.
- The link group, the chain icon. It sets which windows a click on a row changes.
- The column headings: drag a heading's right edge to set the column's width, or drag a heading onto another to move the column. A click on a heading does not sort.
- A symbol: click it to show that stock in every window of the link group. The row then reads Viewing.
- Add a symbol: type a ticker and press Enter or click the plus button. It is added to the end of the list.
Watchlist window: header
This is the window on the replay desk. A screen holds one Watchlist window.
- Watchlist The menu at the left of the header. It picks which list the window shows, and you see it only when you have more than one list. With one list, the header shows that list's name. Default: your newest list.
- Link group The chain icon sets which windows a click on a row changes. The options are Gray, Blue, Violet, Teal and Unlinked. With Unlinked, a click on a row changes no other window. Default: Gray.
- Density Right-click the window's tab for the menu every window has: Density, Add panel, Layout and View. Density sets how tightly this one window draws its rows: Auto, which follows the desk's density, Comfortable, Compact or Dense. The choice is kept for this window. Default: Auto.
Watchlist window: rows and columns
The rows are the list's symbols in their saved order. The columns are the ones the list has on the Watchlists page.
- Column headings Drag a heading's right edge to set the column's width, from 4 to 40 characters. Drag a heading onto another to move the column there. Both are saved on the list, so the Watchlists page shows them too. A click on a heading does not sort: the window always shows the saved order.
- Symbol Click a symbol to show that stock in every window of the link group. The row then reads Viewing. A stock that is not in the replay yet is added at the current replay time first.
- ? and ! A question mark beside a symbol means there is no data for it at this moment: it may not have traded on this date, or the ticker may not exist. An exclamation mark means the ticker is not listed on this date. The symbol stays on the list either way, and hovering the mark gives the reason.
- More The three dots on the row you point at. It opens the row menu. A right-click on the row opens the same menu.
- Copy symbol In the row menu, copies the ticker.
- Remove from In the row menu, followed by the list's name. It takes the symbol off the list at once, on your account and not only in this window.
- Add a symbol The box under the last row. Type a ticker and press Enter or click the plus button. It is added to the end of the list in capitals. A symbol already on the list is ignored.
- Showing the last values read A line above the table when a read could not be made. It gives the time the values on screen are from.
- New watchlist Shown under No watchlists yet when you have no lists. It makes an empty list named Watchlist.
The window never hides a column. A narrow window tightens the table first, then scrolls sideways with the Symbol column kept in place.
Watchlists page: your lists
Click Watchlists in the left rail. The sidebar lists your watchlists, and the page shows the one you click.
- List names Each list shows its name and the number of symbols on it. The newest list is first, and the order cannot be changed.
- New watchlist Turns into a name box. Type a name of up to 64 characters and press Enter, or click the plus button, to make the list and open it. Press Escape to cancel. A new list is empty. An account holds up to 100 watchlists.
- Color themes Opens the color theme editor. Watchlists and the Scanner share one set of themes, so a theme you change here changes every scan and watchlist column that uses it.
Watchlists page: the list's header
- Rename Click the list's name, or the pencil beside it, to rename it. Enter or a click away saves, and Escape puts the old name back. A blank name is not saved, and a name can be up to 64 characters.
- Values as of The line under the name says which moment the numbers are from. With a replay open it reads Values at this replay's clock on, then the replay's date. With no replay open it reads Values as of, then the newest day that has been scanned.
- Add a symbol Type a ticker and press Enter or click Add. A ticker may use letters, digits, full stops, hyphens and underscores, and a list holds up to 200 symbols. A symbol already on the list is ignored. A ticker the app does not know is still added.
- Columns Shows or hides the column setup. It sits beside the table on a wide screen and above it on a narrow one.
- More for this list The three dots at the end of the header. Its menu holds Rename and Delete list.
- Delete list Deletes the list at once. There is no confirmation and no undo. A Watchlist window that showed it moves to your newest list.
Watchlists page: the table
- Sort by Click a number column's heading to sort high to low, again for low to high, and a third time to go back to the saved order. Empty cells sort last. Symbol, Name and Date do not sort. The sort is for looking only: it is not saved, and the Watchlist window does not follow it.
- Back to saved order Clears the sort, and shows while a column sorts the table, beside the line Sorted by a column. Go back to saved order to reorder.
- Move up and Move down The arrows on the row you point at. Each moves the symbol one place in the saved order. They are off while the table is sorted.
- Remove from this list The cross on the row you point at. It takes the symbol off the list at once.
- Column headings Drag a heading's right edge to set the column's width, from 4 to 40 characters, or drag a heading onto another to move the column. Both are saved on the list at once, without Save columns.
Numbers are rounded to read, and hovering a cell shows the exact value. The ? and ! marks beside a symbol mean the same as in the Watchlist window.
Columns
The column setup lists the list's columns from first to last. Each column can appear once. A list that has never chosen columns shows the default set.
- Close the column setup The cross at the top of the setup. Changes you have not saved are dropped without a warning.
- Window A column measured over a span of time has a box for its length, with the unit beside it: m for minutes, sessions for trading days. It starts at that metric's own default and takes a whole number within the metric's range. A list can use at most 8 different windows.
- Color theme The menu on a number column that reads No theme to start with. A theme paints each cell by its value. The options are No theme and each of your color themes; Symbol, Name and Date take none. A column whose theme was deleted reads Deleted theme until you pick another. Default: No theme.
- Move column up and Move column down The arrows on each row of the setup. Symbol moves like any other column.
- Remove column The cross on a row of the setup. Symbol has none, because it cannot be removed.
- Add columns Opens a searchable list in groups, with Table columns first and the Scanner's number metrics after it. Pick one to add it as the last column. A column already on the list is not offered. Rank chg, and metrics that show a word such as a sector, are not offered either.
- Save columns Saves the setup and closes it. You can click it only when there is a change that can be saved. If a change cannot be saved, a line above the button says why.
- Use the default columns Puts the list back to the default columns and saves at once, without Save columns. Default: Symbol, Last, Chg %, Vol, RVOL.
- Color themes Opens the color theme editor, the same one the sidebar link opens.
Good to know
- Watchlists are kept on your account: each list's name, its symbols in order, and its columns with their widths, windows and themes. They are the same in every browser you sign in from, and Start over leaves them alone. Which list a Watchlist window shows, and its link group, are kept with that window in your layout.
- A new account opens on the Scalper layout, which has no Watchlist window. Scanner day, Research and Classic each hold one. To add it, click + Panel and choose Watchlist.
- A Watchlist window that has not picked a list shows your newest list, so making a new list changes what that window shows. To keep a list in a window, pick it in the window's menu. If it is the list already showing, pick another list first and then pick it back, because choosing the list that is already selected keeps nothing.
- In a replay, a Scanner row whose stock is not yet in the replay, and every Alert scanner row, has a menu that offers Add to, then each list's name. With no lists yet it offers Add to a new watchlist, which makes a list named after that symbol.
- The window cannot sort, reorder symbols or choose columns. Do those on the Watchlists page. Column widths and column order can be changed in either place.