Price alerts, Notes and Short locate windows
Price alerts, Notes and Short locate are three small windows of the replay desk: your alerts on single stocks, your notes for the stock and day in focus, and the place to buy a locate before you short a hard-to-borrow stock. Only Short locate has a gear, and it holds one setting, a price warning. Alerts, notes and the price warning are kept on your account, not with a window or a layout, and locates are kept with the replay they were bought in.
Where the settings are
Click + Panel on the row of screen tabs and choose Price alerts, Notes or Short locate. The same list is under Add panel when you right-click a window's tab, and in Search and commands (Ctrl+K, ⌘K on a Mac) as Add panel: and the name. A screen holds one of each, so choosing one that is already open brings it to the front. Show price alerts in Search and commands also brings up Price alerts, and so does a click on alert in the status bar once an alert has fired. The order ticket has no standing Locate button. After it refuses a short because the stock needs a locate, a button reading Locate and a share count shows beside the ticket's message. That button opens Short locate with the stock and the missing shares filled in. No key opens any of the three. An alert waits for Save, a note for Enter and a locate for Accept. Everything else on this page applies at once.
The Price alerts window
- On the Scalper layout, Price alerts is a tab behind the daily chart.
- An alert: the symbol and condition, then a dot and the alert's state. This one is armed, which means it is on and has not fired in this replay.
- Disarm, the pencil and the bin. Disarm turns the alert off, and the button then reads Arm. The pencil opens the form on this alert. The bin deletes it at once, with no confirmation and no undo.
- Symbol: the stock to watch.
- Condition type: price cross or new high.
- Operator, for price cross only: ≥ or ≤.
- Price, for price cross only.
- Save saves the alert and closes the form.
- Cancel, the cross beside Save, closes the form and keeps nothing.
The Notes window
- The box at the top: Enter saves the note and Shift+Enter starts a new line.
- The time of a stamped note, in New York time. Click it to move the replay to that moment.
- A saved note: click it to edit it in place. Point at it for the bin, which deletes it at once.
The Short locate window
- The header's two icons. The chain sets this window's link group. The two sliders are Locate settings: they show or hide the two boxes under Warn when a locate costs more than.
- Symbol and Shares: the stock to locate and how many shares. Enter in either box asks for a quote.
- The size buttons, one for each of your Size buttons, and Quote, which asks what that many shares cost to locate. A quote costs nothing and holds nothing.
- The offer: HTB is hard to borrow, Available is the shares left to locate, A share is the fee for one share and Total is the fee for all the shares.
- Borrow read at: the time of the borrow data the offer was priced from, in New York time.
- Accept buys the locate. The fee is taken in full at once and is not refundable. Reject clears the offer without buying.
- The table of the locates you hold in this replay. With none it reads No locates bought yet.
Price alerts: add or edit an alert
Price alerts is your own list of alerts on single stocks. It is a different window from Alert scanner, which lists the alerts of one alert setup, and from Scanner.
- Add alert Opens the form under the list, with empty boxes. The form holds one alert at a time, so the button is hidden while it is open.
- Symbol The stock to watch, up to 16 characters, saved in capitals. It can be any ticker, not only a stock that is open in the replay. Default: empty.
- Condition type What the alert watches for. The options: price cross, new high. price cross fires when the stock trades through a price you set, and new high fires when a trade prints above the high of the day so far and takes no price. Default: price cross.
- Operator For price cross only. The options: ≥, ≤. ≥ fires on a trade at or above your price when the trade before it was below, and ≤ on a trade at or below your price when the trade before it was above. Default: ≥.
- Price For price cross only. A price above zero in plain digits, with up to 9 decimals. Default: empty.
- Save Saves the alert and closes the form. You can click it once there is a symbol and, for price cross, a valid price. A new alert starts armed, and saving an edit clears a triggered state.
- Cancel The cross beside Save. It closes the form and keeps nothing.
An alert has no repeat setting and no sound: it fires once each time it is armed. A price the stock is already past does not fire until the stock crosses it again, and a trade smaller than the stock's round lot on that day does not count.
Price alerts: the list and a fired alert
The list has one row for each alert, newest first. A row reads the symbol and condition, such as ABCD ≥ 6.50 or ABCD new high, then a dot and the alert's state.
- armed The alert is on and has not fired in this replay.
- triggered The alert fired in this replay. It stays triggered, and does not fire again, until you disarm and arm it, edit it, or rewind the replay to before the moment it fired.
- disarmed The alert is off. It stays in the list and is not watched.
- loading and not watching Shown in place of armed while the alert's stock is not in the replay. An armed alert loads its own stock in the background and reads loading until it is in. Only the first 4 alert stocks load by themselves: any other reads not watching until you open that stock in a window, and so does a stock that cannot be loaded on that day, with the reason shown when you point at the word.
- Arm and Disarm The button on each row, named for what a click does. Disarm turns the alert off and Arm turns it back on. Either one clears a triggered state.
- Edit alert The pencil opens the form with the alert's symbol and condition filled in.
- Delete alert The bin deletes the alert at once, with no confirmation and no undo.
- Allow notifications? A line with Allow and Not now, shown once after you first add or arm an alert. Allow lets your browser notify you of a fired alert while every window of the app is hidden. Your answer is kept on this device and the line does not come back.
- alert The word alert with a dot in the status bar, shown once any alert has fired in this replay. Click it to show the Price alerts window, which is added if the screen has none. It is the status bar's Alert item, which you can switch off.
- Alert fired A pill at the foot of the screen for 6 seconds when an alert fires while the status bar, or its Alert item, is hidden. Click it to show the Price alerts window.
A fired alert makes no sound and opens no message on the desk. With no alerts the window reads No alerts. Add a price or high-of-day cross to be notified during replay.
Notes
Notes holds what you write for the stock and day in focus: the stock lit under Focus in the sidebar, which follows the Gray link group unless you pick another group there, and the date of the replay. A note belongs to that stock and date, not to one replay, so it is there whenever you replay that day again.
- Add a note… (Enter saves) The box at the top: Enter saves the note and Shift+Enter starts a new line. A note holds up to 5,000 characters and shows at once, faint until it is saved. Written while the replay is connected, it is stamped with the replay time of that moment.
- Click to edit A saved note is plain text, listed newest first by when you wrote it. Click one to edit it in place: Enter or a click away saves, Shift+Enter starts a new line and Esc cancels. An edit left blank keeps the old text, and an edit never changes the note's time.
- Jump to The time at the left of a stamped note, in New York time. Click it to move the replay to that moment. A jump back that would undo fills or orders asks first, as any rewind does.
- Delete note The bin, shown when you point at a note. It deletes the note at once, with no confirmation and no undo.
- Retry Shown beside Couldn't save. or Couldn't delete. when a change did not reach the server. A new note that failed to save also gets a Discard note bin.
- N The mark a stamped note leaves on the chart: a small circle with N above the bar that holds the note's time. It is on every chart of that stock and day once the replay clock has reached the note, and goes again if you rewind past it. Notes in the same bar share one mark, and tick charts show none.
- Pinned in the replay A fold on a trade's page in the journal: the notes pinned to that trade, with a box to add more. A trade with none shows a Pin a note link in its place. A pinned note also shows in the Notes window for that stock and day, stamped with the trade's entry time, but a note written in the Notes window is not pinned to a trade and does not show in the journal.
With no stock in focus the window reads Pick a symbol to add notes for the replay. With no notes for the stock and day it reads No notes yet.
Short locate: ask for and accept a locate
This window is where you borrow shares before you short a hard-to-borrow stock. Whether a stock needs a locate, how many shares there are and what they cost come from the borrow data of the day being replayed, read at the replay clock.
- Link group The chain icon in the header. The Symbol box follows the stock of this window's link group until you type a symbol yourself. The options: Gray, Blue, Violet, Teal, Unlinked. Default: Gray.
- Locate settings The gear in the header, drawn as two sliders. It shows or hides the two boxes under Warn when a locate costs more than. A right-click on the header shows them too, but does not hide them again.
- Cents a share Under Warn when a locate costs more than. A locate whose fee is above this many cents a share asks before it buys. Leave the box empty to turn this warning off. Default: empty.
- Percent of price Under the same heading. A locate whose fee a share is above this percent of the share price asks before it buys. Leave the box empty to turn this warning off. Default: 1.
- Symbol The stock to locate, up to 16 characters, in capitals. Enter asks for a quote.
- Shares How many shares to locate: whole shares, up to 9 digits. Enter asks for a quote. Default: your Default qty, which is 100 unless you changed it.
- Size buttons One button for each of your Size buttons in the Order entry settings. A click puts that size in Shares. Default: 100, 200, 500, 1000.
- Quote Asks what that many shares of that stock cost to locate. A quote costs nothing and holds nothing. The window also asks by itself when you change either box, after a purchase, and when an offer is more than ten seconds of replay time old or the clock moves back.
- HTB The tag at the start of an offer: hard to borrow. It is the same tag that sits beside the ticker at the top of Level 2 · DOM.
- Available In the offer, the shares left to locate: what that day's borrow data lists, less what you have already located in this replay. It shows a dash when the data gives no count.
- A share In the offer, the fee for one share: three days of the stock's yearly borrow fee on its bid, counted on a 360-day year. It is never less than half a cent a share and never more than 5% of the bid, and where the two clash the 5% limit wins. It is shown to four decimals, rounded up.
- Total In the offer, the fee for all the shares, to the cent.
- Borrow read at In the offer, the time of the borrow data the offer was priced from, in New York time.
- Accept Buys the locate, and the fee is taken in full at once and is not refundable. When Accept cannot be clicked, the reason is written beside it, such as Ask for a new quote. or The offer aged out. Pricing again.
- Reject Clears the offer without buying. The window then reads Pricing… until you click Quote or change the symbol or the shares.
- Buy it and Keep looking Shown in place of Accept and Reject after you click Accept on an offer that is above your price warning, beside a line that gives the total and the fee a share and ends Buy it? Buy it buys the locate. Keep looking goes back to the offer, with Accept and Reject.
After a purchase the window reads Located, then the shares and symbol, the total, and The fee is not refundable. The fee is priced again at the moment you accept: if it differs from the offer, a line starting Charged gives both figures.
Short locate: status words and your locates
When there is no offer the window gives a short status and a sentence that says why. Under it, a table lists the locates you hold in this replay.
- easy to borrow The stock needs no locate at this point of that day. There is nothing to buy: short it from the order ticket.
- no shares to borrow That day's borrow data has no shares of the stock at this time. There is no locate to buy, and a short of the stock is refused.
- no borrow data There is no borrow data for the stock at this point of that day, so there is no locate to buy.
- fewer shares left You asked for more shares than are left to locate. The sentence gives the number left: ask for that many or fewer.
- no usable quote The stock has no bid at this moment, so there is no price to work the fee from.
- buying power The fee is more than your buying power covers. The sentence gives the fee.
- Pricing… and Buying… Pricing… shows while the window waits for a quote. Buying… shows while a locate you accepted is being bought.
- Symbol The first column of the table, with one row for each stock you have located in this replay. Click a row to put its symbol and located shares back in the form.
- Located The shares you have located for the stock in this replay. A second locate for the same stock adds to it.
- Used The shares the locate is covering now: your open short plus your short orders that are still working.
- Left Located less Used, never below zero. This is what you can still short. Shares you cover are free to short again.
- Status Located while the replay's day runs, and Expired once the day has ended.
A locate lasts until the replay's day ends: the window then reads Replay closed. Locates expired. and its boxes are switched off. With no locates the table reads No locates bought yet.
Good to know
- A new account opens on the Scalper layout, where Price alerts is a tab behind the daily chart. Notes is in the Research and Classic layouts. No built-in layout holds Short locate: add it with + Panel, or let the order ticket's Locate button open it.
- Price alerts are kept on your account, up to 100, and the list is the same in every replay and on every day. Whether an alert has fired is kept only while that replay stays open in your browser: reload the page, open another day, or open the same day again, and every armed alert reads armed.
- The replay reads your alerts when you press play and when you move the replay clock, so an alert you add or change while the replay is playing counts from the next time you do either. Moving the clock starts every alert again from the new time: rewind to before an alert fired and it can fire again, and a jump forward does not fire an alert for a price crossed inside the jump.
- Notes are kept on your account by stock and date. Start over deletes your notes and keeps your price alerts.
- The price warning is one limit for your account. Every Short locate window uses it, and Replay settings lists it under Order entry as Locate warning. A locate and its fee belong to the replay they were bought in: rewind to before you accepted and both are undone. The window's link group is kept with the window in your layout.